优化管材堆场

An Indian company asked for a hoisting plan-automation of the pipe yard. Goal: Improve efficiency and safety.

In the traditional storage yard, cranes and belts and slings are used to achieve lifting. The disadvantage of this method of lifting is that the hooks and hooks of the pipes are all done by hand. The customer chose to use the gantry crane to match the Aerolift vacuum spreader.

Vacuum lifter integrated with gantry crane
To save weight, lifting height and cost, the cable drum of the gantry crane is integrated into the main unit of the vacuum spreader. Enables the vacuum spreader to be attached directly to the crane wire rope. Save about 1 ton of lifting weight and 1500 mm of lifting height.

Other uses of the main beam of the
vacuum spreader There are three hooks on the main beam of the vacuum spreader. When the suction cup is not installed, it can be used as a standard lifting beam.

Advantages of Vacuum Pipe Lifters
In this case, safety is one of the key reasons for deciding on a vacuum lift solution. The second reason is efficiency. Safe pick-up and separation in the crane operating room. There is no need for personnel to approach the load during the loading and unloading process, thereby reducing the risk of casualties and greatly increasing safety and reliability! 

illustrate

• India
• 2019/2021
• 20 tons

product

• Steel pipe; bare/coated/seamless/ERW/spiral/L SAW
• Length: 8.000 - 18.000 mm
• Diameter: 8" - 56"
• Wall thickness: 6,0 - 20,0 mm
• Weight: Maximum vacuum load 10 000 kg, maximum beam load 20 000 kg

More information on lifting solutions

• Main beam length: about 7.000 mm
• Main beam width: about 1.500mm
• Main beam height: about 1.500mm
• Equipment weight: about 3000 kg, including suction cups
• The safety release system is set at the suspension point to prevent release during transportation.